Greenhouse Polycarbonate Glazing

I’m trying to reinstall a greenhouse I previously dismantled, but realize I no longer know which side of the polycarbonate glazing is treated.

Is there any way of telling which side is which, once you’ve removed the film which was initially attached, and remove it from the frames for storage?

What is the likely outcome if I just replace the sheets any old way and hope for the best?

1 Comment (Open | Close)

1 Comment To "Greenhouse Polycarbonate Glazing"

#1 Comment By roseman On 03/19/2011 @ 9:55 am

You might look closely at each sheet and see if there are any markings or sealant on the edges that would tell you they had been to the outside. Another way, but a real time consumer, is to place the panels against something like a sawhorse, lay newspaper underneath them for a while and take note of the ones where the news paper starts to yellow first, this may help but is not fool proof. You might try contacting the folks at this link and see if they have a good way to determine this, I know it is very important: http://www.greenhouses-etc.net/glazing/contact_us.html ^[1]

Stan

Article printed from Gardening Know How Questions & Answers: https://questions.gardeningknowhow.com

URL to article: https://questions.gardeningknowhow.com/greenhouse-polycarbonate-glazing/

URLs in this post:

[1] http://www.greenhouses-etc.net/glazing/contact_us.html: http://www.greenhouses-etc.net/glazing/contact_us.html

Have any questions about this topic? Visit us at https://questions.gardeningknowhow.com to ask your questions and get friendly answers from gardening experts.

You can also find us at:
'Like' us on Facebook: https://www.facebook.com/gardeningknowhow
Follow us on Twitter: https://twitter.com/gardenknowhow - @gardenknowhow
Follow us on Pinterest: https://pinterest.com/gardenknowhow/